Polaris 2015 Slingshot - Manual (Page 28)

26
FEATURES AND CONTROLS
Multi-Function Display
Engine Error Codes
The error screen displays only when the
CHECK ENGINE light is on or when it goes
on and off during one ignition cycle. Error
codes are not stored. When the key is turned
OFF, the code and message is lost, but will
reappear if the fault reoccurs after restarting
the engine.
If the CHECK ENGINE indicator lamp
illuminates, retrieve the error codes from the
display.
1. If the error codes are not displayed, use the
MODE button to toggle until “Ck ENG”
displays on the main line of the display.
2. Press and hold the MODE button to enter the diagnostics code menu.
3. Record the numbers displayed in the gear position (if any), clock and odometer displays.
4. Press the MODE button to advance to the next error code.
5. Press and hold the MODE button to exit the diagnostics code menu.
6. See your authorized dealer for code details and diagnosis.
Suspect Parameter
Number (SPN)
Error Code
Number (0-9)
Failure Mode Indicator (FMI)