beautypg.com

Troubleshooting, Service schedule, Chart – Polaris 2013 BRUTUS Accessory Angle Broom User Manual

Page 34: Description

background image

33

TROUBLESHOOTING

WARNING!

Instructions are necessary before operating or servicing machine. Read and understand the Owner’s Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or service. Check for correct
function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death

.

Chart

SERVICE SCHEDULE

Description

Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures. The
service schedule is a guide for correct maintenance of the attachment.

WARNING!

Instructions are necessary before operating or servicing machine. Read and understand the Owner’s Manual, Operator’s Handbook and
signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or service. Check for correct
function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death

.

Chart

[1] Service at first 50 hours and then as scheduled.

PROBLEM

CAUSE

CORRECTION

Angle broom does not
operate.

Damaged or incorrect attachment of the PTO
shaft.

Check connection, connect properly, repair
or replace.

Bristle shaft shear bolt has sheared / missing.

Replace bolt.

Gearbox input shaft shear bolt has sheared or
missing.

Replace bolt.

Broom bristles wear quickly.

Too much down pressure being applied to the
broom.

Adjust the wheel height.

Adjust spring tension.

Broom operation not effective. Broom bristles worn to minimum length.

Replace Broom bristle sections.

SERVICE SCHEDULE

FREQUENCY

ITEM

SERVICE REQUIRED

DAILY

2 HOURS

50 HOURS

200 HOURS/

YEARLY

Attachment Frame Inspection

Inspect for cracks or damage.

Wheel Inspection

Inspect for excess wear, cracks, damage
and loose hardware.

Grease PTO Shaft

Grease PTO shaft and u-joints.

Lubricate the Wheel Assemblies

Lubricate the wheel assemblies.

Replace Gearbox Lube

Drain and replace fluid - 14 fl. oz. (0.414
L) of Polaris Angle Broom Oil

[1]