Polaris 2013 BRUTUS Accessory Angle Broom - Manual (Page 17)

16
OPERATION
Entering and Existing The Utility Vehicle
Entering
WARNING!
Operator must have instructions before operating the machine. Untrained
operators can cause injury or death.
WARNING!
AVOID INJURY OR DEATH
When operating the machine:
• Operate only from the driver’s seat .
• Keep the seat belts fastened snugly .
• Keep entire body inside the vehicle .
Enter and exit the operator seat of the utility vehicle from the left side.
Tip: The left side of the utility vehicle as viewed from the operator seat.
1. Insert the tab (Item 1) into the buckle (Item 2). Position the lap belt as low as possible on the hips – not on the waist, then
adjust it to a snug fit by pulling the shoulder portion upward through the latch plate.
Tip: Use a single safety belt for one person at a time. Do not use a single safety
belt for two or more people - this includes children.
Exiting
WARNING!
AVOID INJURY OR DEATH
Before leaving the operator seat:
• Park on flat level ground .
• Lower the attachment arm, put the attachment flat on the ground .
• Press the brake and put the gear selector lever in PARK .
• Stop the engine and remove the key .
• Make sure PTO driveline and all rotating parts have come to a complete stop.
SEE THE BRUTUS OWNER’S MANUAL FOR MORE INFORMATION.
1. To release the seat belt, press the buckle release button (Item 1)
and allow the belt to retract.
2. Remove the key to prevent operation of the utility vehicle by unau-
thorized personnel.
3. Exit the utility vehicle.
1
2