Polaris 2014 Ranger 570 EFI - Manual (Page 63)

61
MAINTENANCE
Engine Oil
Oil and Filter Change
Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart
beginning on page 57. Always change the oil filter whenever changing oil.
The engine drain plug is located on the bottom of the
crankcase.
1. Position the vehicle on a level surface. Place the
transmission in PARK. Apply the brakes.
2. Start the engine. Allow it to idle for two to three minutes.
Stop the engine.
3. Clean the area around the drain plug.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to
contact skin.
4. Place a drain pan beneath engine crankcase and remove the
drain plug.
5. Allow the oil to drain completely.
6. Reinstall the sealing washer on the drain plug.
Tip: The sealing surfaces on drain plug and crankcase should be
clean and free of burrs, nicks or scratches.
7. Reinstall the drain plug. Torque to 12 ft. lbs. (16 Nm).
Drain Plug Access