Polaris 2014 Ranger 570 EFI - Manual (Page 36)

34
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 24, 74
Brake fluid Ensure proper level 74
Park gear Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 59
Rear suspension Inspect, lubricate if necessary 59
Steering Ensure free operation 75
Tires Inspect condition and pressure 12, 76
Wheels/fasteners Inspect, ensure fastener tightness 76
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 24, 60
Coolant level Ensure proper level 67
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 73
Indicator lights/switches Ensure operation -
Air filter, pre-filter Inspect, clean 71, 71
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
78
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
79
Seat Belts Check length of belt for damage, check latches for
proper operation
25
Cab Nets Check for wear or damage, ensure proper installation 26