beautypg.com

Maintenance, Fuses, Lights – Polaris 2014 Ranger 570 EFI User Manual

Page 80

background image

78

MAINTENANCE

Fuses

If the engine stops or will not start, or if you
experience other electrical failures, a fuse may need
replacement. Locate and correct any short circuits
that may have caused the blown fuse, then replace
the fuse.

The fuse box is located in the electrical compartment
under the left rearmost seat. Spare fuses are provided
in the fuse box.

If you suspect that a fuse or relay may not be
working properly, please see your POLARIS dealer.

Lights

Poor lighting can result in reduced visibility when driving. Headlight and taillight lenses
become dirty during normal operation. Clean lights frequently and replace burned out lamps
promptly. Do not operate this vehicle at night or in low light conditions until the headlight is
replaced. Always make sure lights are adjusted properly for best visibility.

When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin
leaves a residue, causing a hot spot that will shorten the life of the lamp.

Headlight Lamp Replacement

1. Open the hood.

CAUTION! Hot components can cause burns to skin.
Allow lamps to cool before servicing.

2. Unplug the headlamp from the wiring

harness. Be sure to pull on the connector, not
on the wiring.

3. Turn the lamp counterclockwise to remove

it.

4. Install the new lamp.

Tip: Make sure the tab on the lamp locates properly in

the housing.

5. Reinstall the harness assembly into the

headlight assembly.

Fuse Size

Feature Supported

7.5A

Brake Light, Fuel Pump

10A

Drive System

20A

EFI, Lights, Accessories

30A

Chassis, Power Steering (if equipped)

Wiring Harness