Emerson Radio MS3111M - Manual (Page 28)

27
4.) Press the OP/CL or OPEN/CLOSE button again to close the CD door.
The display will show “TOC READ” as the player reads the Table Of Contents
on the disc.
NOTES:
• The reading time may be even longer if you are using CD-RW
(ReWritable) discs. This is normal and not an indication of any problem
with your unit.
• The player ‘stops’ after reading the the DISC 1 , and will not proceed to
the DISC 2 or DISC 3.
• If there’s no disc in DISC 1, it will briefly show “NO DISC”, then proceed
to the next DISC.
• If all 3 discs are loaded, you may press CD1, CD2, or CD3 button to
select which disc to start playing first.
• After reading the disc, total Tracks and
P l a y i n g T i m e w i l l a p p e a r o n t h e
display.
5.) Press the PLAY/PAUSE button to start playback.
The indicator appears in the display.
6.) When playback begins, adjust the VOLUME and EQ controls as desired.
7.) Playback will continue until all tracks on all discs have been played, then the
player stops and the display shows the total tracks number and playing time on
the last disc played.
To stop playback at any time, press the STOP or /BAND button.
8.) If you are finished listening, press the OP/CL or OPEN/CLOSE button to
open the CD door, remove your discs from the player, re-close the door and
press the STANDBY button to return the system to the Standby (Off) mode.
MS3111M_112306.p65 23/11/2006, 10:44 27