Emerson Radio MS3111M - Manual (Page 20)

19
Volume Controls
To increase or decrease the system volume press the VOLUME or VOL +
buttons on the front panel or the remote control.
The Volume Level Indicator will appear on the
display when you change the volume level.
The level indicator ranges from “00” (Minimum)
to “30” (Maximum).
The system remembers the volume level when the power is switched ‘Off’ and
automatically returns to the same level when the power is switched ‘On’ again.
EQ (Electronic Preset Equalizer)
The preset equalizer allows you to adjust the sound characteristic for the most
popular types of music.
Press the EQ button on the front panel or the remote control to cycle through the
following equalizer settings: FLAT (EQ ‘Off’), CLASSIC, ROCK, or POP.
The appropriate EQ indicator appears in the display to confirm your selection. The
system remembers the EQ setting when the power is switched ‘Off’ and returns to
the same setting when the power is switched ‘On’ again.
FM STEREO/MONO Button
If you are listening to a weak or distant FM stereo station you may be able to
improve the reception by pressing the STEREO/MONO button on the front panel
or button on the remote control to select the FM Mono mode.
The STEREO indicator will go off. The reception will normally improve but the
sound will no longer be in stereo.
NOTE: The button has no effect when listening to external sources connected
to the AUX-IN jack.
MS3111M_112306.p65 23/11/2006, 10:44 19