Emerson Radio MS3111M - Manual (Page 23)

22
Listening To The Radio
1.) Press the STANDBY button to turn the system ‘On’.
2.) Press the FUNCTION or FUNC. button to
select the Tuner mode.
An AM or FM frequency will appear on the
display.
Press the BAND button on front panel or (Stop)/BAND button on remote
control to switch between the AM and FM bands if necessary.
3.) Tune to the desired station as follows:
• Manual Tuning
Repeatedly press the or until the display shows the exact frequency of
the desired station. Use the Manual Tuning method to tune to weak or distant
stations that are not strong enough to be recognized by the Automatic Tuning
system.
• Automatic Tuning
Depress and hold the or buttons until the display begins to move, then
release the buttons. The Tuner will search up or down the band for the next
strong signal and stop on that station. Repeat this procedure until the tuner
stops on your desired station.
4.) If you tuned to an FM Stereo station the
STEREO indicator will appear in the
display.
If the FM Stereo reception is noisy or weak, press the STEREO/MONO button
on front panel or button on remote control to select the FM Mono mode.
5.) Adjust the VOLUME and EQ controls to the desired settings.
6.) When you are finished listening press the STANDBY button to return the
system to the Standby (Off) mode.
The display changes from radio frequency to correct time.
MS3111M_112306.p65 23/11/2006, 10:44 22