Troubleshooting, Engine stops or loses power – Polaris 2008 Ranger 4x4 700 EFI User Manual
Page 121
118
TROUBLESHOOTING
Engine Stops or Loses Power
Possible Cause
Solution
Out of fuel
Refuel
Kinked or plugged fuel vent line
Inspect and replace
Water is present in fuel
Replace with new fuel
Fouled or defective spark plugs
Inspect, clean and/or replace spark plug
Worn or defective spark plug wires
See your dealer
Incorrect spark plug gap or heat range
Set gap to specs or replace plug
Loose ignition connections
Check all connections and tighten
Low battery voltage
Recharge the battery to 12.8 VDC
Incorrect fuel
Replace with fresh recommended fuel
Clogged air filter
Inspect and clean or replace
Other mechanical failure
See your dealer
Overheated engine
Clean radiator screen and core, clean
engine exterior, see your dealer
This manual is related to the following products: