Maintenance, Gearcases – Polaris 2008 Ranger 4x4 700 EFI User Manual
Page 78

75
MAINTENANCE
Gearcases
Rear Gearcase
Always check and change the rear gearcase oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 60.
Refer to the Gearcase Specifications Chart on page 70 for recommended
lubricants, capacities and torque specifications. See page 114 for the
part numbers of Polaris products.
The rear gearcase fill plug is on the driver's side of the rear gearcase.
Oil Check (4X4)
Maintain the oil level even
with the bottom thread of
the fill plug hole.
1. Position the vehicle on
a level surface.
2. Remove the fill plug.
Check the oil level.
3. Add the recommended
oil as needed.
4. Reinstall the fill plug.
Torque to specification.
Oil Check (6X6)
The easiest way to check for
adequate oil in the 6X6 is to
drain and refill the gearcase to
capacity (see page 70). Perform
the oil change as outlined on
page 76.
4X4
Fill Plug
Drain Plug
Drain Plug
Fill
Plug
6X6