Polaris 2008 Victory Hammer - Manual (Page 61)

2-4mm
56
PRE-OPERATION CHECK
Check Throttle Control Grip and Cables
See your authorized VICTORY dealer for service if the throttle
fails to operate smoothly, if the grip does not return to the rest
position properly, or if throttle cable ends begin to fray.
1. Rotate the throttle control grip. It should rotate smoothly
from its rest position to its completely open position and back
again. It should return to its rest position quickly when
released.
2. Throttle freeplay is the amount of throttle control grip
movement from the rest position to the point of cable
resistance. Freeplay should be 2-4 mm. Adjust throttle
freeplay if necessary. See page 104.
3. Remove the right side access cover (1). Inspect throttle
cables (2) for frayed ends.
1
2