Polaris 2008 Victory Hammer - Manual (Page 107)

102
MAINTENANCE
Fuel System
Fuel can damage painted surfaces and plastic parts. Wipe spilled fuel immediately from the motorcycle using a
clean, dry, soft cloth.
Caution
5. With the engine and exhaust cool, wrap a clean shop towel around the fuel
line fitting (2) at the fuel rail. Disconnect it from the fuel rail by squeezing
both release buttons (3) simultaneously. Gently slide the fitting from the
fuel rail.
6. At the rear left side of the tank, disconnect the tank vent hose (California
models) and the water drain hose.
7. Carefully remove the fuel tank.
8. To reinstall the fuel tank, reverse the removal steps, routing fuel supply
hose to the right of breather hose.
9. Reinstall the fuel line fitting to the fuel rail by sliding the quick-connect
onto the rail connector until you hear it click.
10. Reinstall the fuel tank mounting screws.
Torque: 35 ft-lb. (47.5 Nm)
11. Reinstall the fuel line access cover. Reinstall the seat.
Replace Fuel Filter
The fuel filters are attached to the electric fuel pump located inside the fuel tank. Fuel filter condition is associated
with engine performance and fuel economy. For fuel filter replacement procedures and special tools required, see
the VICTORY Service Manual or contact an authorized VICTORY dealer.
2
3