Polaris 2008 Victory Hammer - Manual (Page 111)

106
MAINTENANCE
Mechanical Clutch
Adjust Clutch Cable Freeplay
1. Remove the right side cover.
2. Hold cable (1) and loosen the adjuster lock nut (2).
3. Turn cable adjuster (3) while holding cable.
4. Turn the cable adjuster in or out until the clutch lever
freeplay (4) is 0.5-1.5 mm.
5. Tighten the adjuster lock nut securely while holding
cable.
6. Reinstall right side cover.
7. Verify that the safety switch activates so the motorcycle
cannot be started in gear with clutch lever released.
NOTE: The starter interlock switch is dependent on the
clutch lever freeplay being set correctly to ensure activation
of the clutch safety switch.
3
1
2
NEW IMAGE
4