Polaris 2008 Victory Hammer - Manual (Page 56)

51
PRE-OPERATION CHECK
Check Fuel Components
Fuel Level
1. Straddle the motorcycle on level ground and bring it to a vertical position.
2. Turn the ignition switch to the ON position and watch the fuel indicator light on the panel. NOTE: The light
will stay on if less than .8 gallons (3.08 liters) remains in the tank after starting the engine.
3. Check the fuel level.
4. Estimate your next fuel stop and plan accordingly to avoid running out of fuel.
Fuel Hose, Rail and Connections
Inspect the fuel hoses for cracks or damage. Inspect the hose connection at the fuel tank and at the fuel rail for
dampness or stains from leaking or dried fuel.
Evaporative Emission Control System (California models)
Visually inspect all evaporative emission control system hoses
and connections. Make sure all connections are tight. Inspect the
evaporative canister (1) to make sure it has not been damaged.
The canister is located on the left side of the motorcycle behind
the side stand.
1