Polaris 2015 ATV Sportsman ACE 570 - Manual (Page 56)

54
OPERATION
Starting the Engine
1. Position the vehicle on a level surface outdoors or in a well-
ventilated area.
2. Sit in the driver's seat and fasten the seat belt. Secure the cab nets.
3. Place the transmission in PARK.
4. Apply the brakes. Do not press the throttle pedal while starting the
engine.
5. Turn the ignition key to the START
position. Engage the starter for a
maximum of five seconds. Release
the key when the engine starts. Turn
the key to either LIGHTS ON or
LIGHTS OFF.
6. If the engine does not start within
five seconds, return the ignition
switch to the OFF position and wait
five seconds. Repeat steps 5 and 6
until the engine starts.
7. Vary the engine RPM slightly with
the throttle to aid in warm up until
the engine idles smoothly.
NOTICE: Operating the vehicle immediately after starting could cause engine
damage. Allow the engine to warm up for several minutes before
operating the vehicle.
Cold Weather Operation
If the vehicle is used year-round, check the oil level frequently. A rising
oil level could indicate the accumulation of contaminates such as water
or excess fuel in the bottom of the crankcase. Water in the bottom of the
crankcase can lead to engine damage and must be drained. Water
accumulation increases as outside temperature decreases.
OFF START