Grass Valley TTN-BDS-6464 - Manual (Page 22)

BDS-6464 Rev. 1
14
SDV layer 3 Input SDV layer 3 Output
1 33
1 33
2 34 2 34
3 35 3 35
4 36 4 36
5 37 5 37
6 38 6 38
7 39 7 39
8 40 8 40
. . . .
. . . .
16
48 16 48
SDV layer 4 Input
SDV layer 4 Output
1 49
1 49
2 50 2 50
3 51 3 51
4 52 4 52
5 53 5 53
6 54 6 54
7 55 7 55
8 56 8 56
. . . .
. . . .
16
64 16 64
5.3 VIT Mode
The BDS-6464 may be configured to switch in different vertical intervals, depending on the video format
that is applicable. This may be either PAL or NTSC.
NTSC (525/60) and PAL (625/50) have different Vertical Intervals. Switching in line 6 in PAL means
switching in line 8 in NTSC. The PAL line 6 switching is not recommended for NTSC, but the NTSC line
10 setting may be used also for PAL.
Switch 7 on the configuration switch SW A selects the VIT mode.
The VIT Mode can be switched according to the following pattern:
- means switch down
* means switch up
Switch
7 VIT Mode
- PAL
(625/50), Line 6
* NTSC (525/60), Line 10
Default is PAL (625/50), Line 6.