Grass Valley Terrapin FTR-D6 User Manual
Page 27
23
Terrapin FTR-D6
User Guide
To install an external battery
1 Unscrew the existing blank bottom plate from the
Terrapin FTR‐D6
unit (1). Retain the
mounting screws for re-use in the next step.
2 Mount the Battery Mount (3) to the External Power bottom plate (2) making sure to
pass the connector through the intended aperture and to not pinch the connector
cable between the two pieces.
In most cases, this step will not be necessary as the battery mount will be shipped
already attached to the External Power bottom plate.
Fig. 3-4: Connecting the External Battery Mounting Plate
3 Connect the Battery Mount connector to the BATTERY IN connector (
):
Fig. 3-5: Connecting the External Battery Mounting Plate
4 Carefully position the now-connected bottom plate on to the Terrapin FTR-D6
,
being
careful not to pinch the cable between the
Terrapin FTR‐D6
and the bottom plate.
5 Attach the bottom plate to the
Terrapin FTR‐D6
unit using the retaining screws set
aside in Step 1.
End of Unit with Power Connection