Grass Valley Terrapin FTR-D6 - Manual (Page 17)

13
Terrapin FTR-D6
User Guide
The "Copper" BNC I/O Panel
The Terrapin FTR-D6 BNC I/O end panel has seven connectors. Each function corresponds
to the label indicated on the top panel of the unit.
Fig. 2-8: BNC I/O Panel
1 Input BNC connector: the Terrapin FTR-D6 accepts any digital signal from 19.2 Mb/s to
3 Gb/s, including many non-standard signals. Please see Supported Signal Types on
page 17 for a list of supported signal types.
2 Output BNC connectors: each output delivers an identical copy of the input signal
whether from the BNC Input (connector #1) or from the Fiber Optic input connection -
depending on the operating mode. Standard 270Mb/s, 1.5Gb/s & 3Gb/s signals are
reclocked.
ADAP Power Supplies
The Terrapin FTR-D6 Fiber Transceiver requires a power supply providing 5-16 volts at 1.5
Amps. The power supply shipped with the unit is the ADAP-AC-04-X (X being the specific
geography required). Any power supply meeting the required specification and providing
power through an XLR-4 Female connector can be used.
Fig. 2-9: Power Supply
Part Number ADAP-AC-04: supplied with 4PIN XLR/A4F connector for the power plug on
the Terrapin FTR-D6 unit