Grass Valley Terrapin FTR-D6 - Manual (Page 18)

14
Components and Operator Modes
Operator Modes & LED Indicators
Operator Modes & LED Indicators
The Terrapin FTR-D6 has four operating modes as follows:
• Fiber optic transmitter with six BNC outputs of the digital video signal
The digital signal input to the BNC is distributed from the six digital signal (BNC)
outputs and is transmitted from the Fiber Optic output.
• Fiber optic repeater with six BNC outputs of the received digital video signal
The Fiber Optic input is re-transmitted out of the Fiber Optic output and is also
distributed from the six digital signal (BNC) outputs.
• Fiber optic receiver with six BNC outputs and Fiber optic transmitter of a separate
digital video signal
The Fiber Optic input is distributed from the six digital signal (BNC) outputs, while a
separate BNC input is sent to the Fiber optic output.
• Fiber optic repeater and local digital video distribution
The Fiber Optic signal is re-transmitted and boosted out of the Fiber Optic Output,
while an input to the Digital signal BNC is distributed to the 6 digital signal outputs.
When the Terrapin FTR-D6 is set in a particular mode, LED indicators on the top panel
display the signal type and direction.
• Blue: Digital signals input to the BNC connector
• Orange: Fiber Optic sourced signals
Fig. 2-10: Signal legend