Grass Valley SHED Jan 16 2015 - Manual (Page 15)

11
SHED-C
User Guide
LED indicators (see Figure 3-1 and the HDX LED Indicators table above) will show
diagnostic information. An Open or Shorted hybrid cable will always result in a fault
condition. The remainder of the LEDs will be Green or Out depending on what type of
camera (or Power Plus) is attached to the HDX (see the HDX LED Indicators table above).
Incoming optical power is indicated on the lower 4-segment display on the HDX. -20 dBm is
the least amount of optical power that can reliably keep the system functioning. If the CCU
is operating normally (typical optical output of approx. -7 dBm) and the HDX is showing
high loss, check your installed cable for bend radius and connector problems.
The Optional LOCAL/REMOTE switch provides the convenience of having your camera
powered down when optical power to the HDX is turned off. So when the switch is in the
REMOTE position (Faceplate LED = Green), turning your camera CCU Off will also turn
power to the camera head Off.
Compatible Camera Systems
Accessory List
• Power Supply for SHED-6 (ADAP-AC-02)
• Singlemode patch cords
• Remote Shut-off option for HDX
Manufacturer Supported Models
Sony HDC700/750
HDC900/930/950
HDC1000/1450/1500/1550
HDC3300
HDCU3300
HDFX-100
BVP-950/CA950 w/CCU900
BVP-9500WS
Ikegami HDK-79E & 790E
HDK-725 & 725P
HDK-75EX
HDK-79EX-II & 790EX-II
HDK-79EC & 79EX
HDK-79EXNA
Grass Valley LDK-6000 series - all
LDK-8000 series - all
Panasonic AK-HC3800
Hitachi CH-HD1000
CH-HD5000
CU-HD500