Grass Valley Profile Local Area Network - Manual (Page 20)

Profile LAN Upgrade Installation
20 Profile LAN Upgrade Installation
Creating an Emergency Repair Disk
NOTE: (1) The emergency repair disk is intended for trained service
personnel to repair Windows NT if it is not operating properly. Repair data
must be updated whenever the system configuration is changed. This includes
software upgrades. Store the repair disk in a safe place for future use.
To make a new emergency repair disk, you need one 3.5" disk. Mark it clearly as
the emergency repair disk for Profile system with serial number xxxxxxx. (You
don’t need to format the disk.)
NOTE: The emergency repair disk is system specific. Make sure that the
emergency repair disk is clearly marked with its Profile system’s serial
number.
1. From the File menu, choose the Run command.
2. Enter rdisk in the Run dialog box.
3. Select the Update Repair Disk button.
4. Insert the floppy disk in the A drive and select OK . The utility then formats
the disk and loads all of the information from the registry.
5. When the operation is complete, select the Exit button to leave the Repair
Disk Utility.
6. Remove the Emergency Repair Disk from the Profile, set WRITE
PROTECT on the disk, and store in a convenient location.