Grass Valley Profile Local Area Network - Manual (Page 16)

Profile LAN Upgrade Installation
16 Profile LAN Upgrade Installation
Reassembly
1. Install any additional Options (PDR0FXX) at this time. Use the procedures
provided with the PDR0FXX kit.
2. Install the Torx mounting screw in the top of the circuit card panel (bracket).
3. If it was necessary to change the location of any of the short circuit cards (to
accommodate the selected location of the new circuit cards), rearrange the
individual ECB hold-downs for the short circuit cards to coincide with the
new locations. Install the retainer for the short circuit cards.
4. Install the retainer for the tall circuit cards.
5. Install the circuit card cover and disk drive cover. Install and tighten the
attaching screws.
6. Install the Profile system in the instrument rack.
7. Install the appropriate cabling to the rear panel connectors of the Profile
system.