beautypg.com

Install the lan circuit card – Grass Valley Profile Local Area Network User Manual

Page 15

background image

Install the LAN Circuit Card

Profile LAN Upgrade Installation

15

CAUTION. Do not exert any force on the rear panel-connectors when
removing or installing circuit cards in the card slots. Except for the LAN
card, two screws hold each circuit card in the card slot, one accessible from
the top of the card and the other accessible from the rear of the card. Both
screws must be removed before the card can be removed from the product.

5. Slide the LAN card down into slot J3. Some resistance will be exerted by the

contact pressure of the connectors. Take care not to exert extreme force to
seat the circuit card.

Figure 4. Inserting the LAN Card

LAN Board A21

9510-1