Grass Valley Visual Status Display v.2.0 - Manual (Page 24)

24 Visual Status Display — Instruction Manual
Section 4 — Prelude VSD Configuration
Figure 10. NP Server Configuration Window
2. In the NP Client Configuration window that opens, enter a name for the
VSD client, the IP address of the PC that will be running VSD, and then
Save the client configuration file ( Figure 11 ).
Figure 11. NP Client Configuration Window
3. The NP Server Configuration window will now show that client
configuration assigned to that panel server.
Save the server
configuration for that panel.
4. Click Send Panel Config to Control Panel , select the control panel you wish to
use as the server, and click Send .
The PC running VSD will now be able to connect to that Prelude control
panel using the panel’s IP address and gain access to the Prelude system.