Grass Valley Visual Status Display v.2.0 - Manual (Page 11)

Visual Status Display — Instruction Manual 11
Section
2
VSD Installation
Distribution
The VSD application is included on the Encore and Compact Router
Control System software CDs, and is available for download from the
Grass Valley Support web site.
Requirements
VSD runs on a customer supplied PC running Windows 2000, Windows XP,
or Windows 7. The PC you use must be a node on the router network, so it
will need to be configured with appropriate IP addresses.
Installing Using the VSD Installer
1. If you have not already done so, configure the PC with IP addresses
appropriate for your Encore or Prelude network.
2. Physically connect the PC’s Ethernet port to the router network.
3. Acquire the VSD software. It can be downloaded from the web onto any
convenient media (hard disk, thumb drive, or burned to CD).
4. Quit any applications running on the PC. You may want to reboot the
computer to ensure all processes (including Port Mapper) have quit.
5. Access the VSD directory and run Setup.exe .