Grass Valley KXI-DVI-Bridge - Manual (Page 15)

USER’S MANUAL
5 Windows Driver Installation
This section contains a step-by-step guide on how to install the DVI-Ramp2 USB driver on Windows
platforms. This driver is also used with the KXI-DVI-Bridge.
NOTE: To perform this installation, you must have administrator privileges on your PC.
1. In a web browser, navigate to the software download page of Miranda Tech Support web portal:
http://www.miranda.com/portal/downloads.php
2. In the Products column, find KXI-DVI-Bridge, then click download.
3. Under Software / Firmware click Download Windows Driver to download the following file:
miranda_dviramp2_usb_XP_Vista.zip
4. Unzip the contents of miranda_dviramp2_usb_XP_Vista.zip to a temporary folder.
5. From this temporary folder, double click installdriver.bat to copy the necessary files.
6. Connect the KXI-DVI_Bridge to the PC with a USB cable.
7. Power up the KXI-DVI_Bridge. The “Found New Hardware” wizard appears on your PC:
8. When prompted to connect to Windows Update, select “No, not this time“
9. Click Next
KXI-DVI-Bridge | 11