Grass Valley KXI-DVI-Bridge - Manual (Page 10)

USER’S MANUAL
2 Installation
2.1 Unpacking
Make sure the following items have been shipped with your KXI-DVI-Bridge. If any of the following items are
missing, contact your distributor or Miranda Technologies Inc.
- KXI-DVI-Bridge unit
- AC power cord
- Power supply (AC to 12V DC converter)
2.2 Mechanical Installation
The KXI-DVI-Bridge is packaged in a free-standing case with feet on the bottom, suitable for installation on a
desk or tabletop.
The KXI-DVI-Bridge is sized so that two KXI-DVI-Bridge units can be installed side-by-side on a 1 RU tray for
rack mounting.
Figure 2.1 Installing two KXI-DVI-Bridge units on a 1 RU tray ( TRAY-120 )
The rear panel of the KXI-DVI-Bridge includes a threaded connection point for a mounting screw (left side of
the rear panel – see figure 2.2) so that the device can be securely mounted on the tray. The Miranda
TRAY-
120 is recommended, as it is configured to hold the KXI-DVI-Bridge case and incorporates a hole for the
mounting screw.
• Before installing the KXI-DVI-Bridge in a tray, you must remove the four rubber feet from the bottom
of the case.
6 | KXI-DVI-Bridge