Grass Valley KXI-DVI-Bridge - Manual (Page 13)

USER’S MANUAL
6 USB/RS-232 OFF – No USB
GREEN when USB is recognized by the PC
ORANGE FLASHING when transmitting packets
ORANGE QUICK FLASH – heart-beat with USB connection available. This indicates that
firmware is in working order
RED QUICK FLASH – heart-beat with no USB connection available. This indicates that
firmware is in working order
At power-up, this LED is OFF
Controls
Only one control is provided at the front panel:
5 RESET button The RESET button is a dual-function control, and operates as follows:
• Quick push and release – resets the USB communication port.
• Push and hold for 5 seconds before releasing – copy the display settings to the
KXI-DVI-Bridge input. This ensures that the input of the KXI-DVI-Bridge will
mimic the display that is connected to its DVI output.
o
Settings on "DVI-D OUT A" are copied to "DVI-D IN A"
o Settings on "DVI-D OUT B" are copied to "DVI-D IN B"
Use a bent paper clip or equivalent thin wire to activate the RESET button through
the hole in the front panel.
KXI-DVI-Bridge | 9