Grass Valley KMV-3901 Jul 30 2012 - Manual (Page 23)

GUIDE TO INSTALLATION AND OPERATION
KMV-3901/3911 | 19
Mosaic Outputs
HDMI outputs (2)
Signal: HDMI V1.3
Format: 2 1280 × 1024 up to 1920 × 1200p configurable
Supported refresh rates: 50 Hz and 59.94 Hz
Cable length: 15 feet
Connector: HDMI type connector
Signal path: 8 bits output
HD-SDI monitoring outputs (2)
Signal: 4:2:2 SMPTE 292M-C (1.5 Gbps), SMPTE 424M
Formats: 3 720p 50Hz, 720p 59.94Hz, 1080i 50Hz, 1080i 59.94Hz, 1080p 50Hz (level A),
1080p 59.94Hz (level A)
Audio: SMPTE 299M (limited to one pair, embedded on group 1, pair 1)
Cable length: 100 m (328 feet) for 3G or HD, 256 m (840 feet) for SD (Belden 1694A)
Jitter: < 0.2 UI
Connector: DIN 1.0/2.3
Reference
Internal: Universal Reference from the Densité frame
GPI I/O
GPI inputs (8)
Contact closure: GND
Protection: up to 24V
Connector: Terminal block interface PCB via DB-26
GPI outputs (2)
Maximum voltage: 24V
Maximum current at 12V: 20mA (through 200 Ω series resistor)
Pulse minimum duration: 10us
Connector:
Terminal block interface PCB via DB-26
2 Please refer to the table on page 12 for a list of supported formats.
3 If you configure an HD-SDI monitoring output for a 1080p format, then the multi-viewer supports a maximum cable
length of 80 m (262 feet)at the video inputs. Refer to “Configuring the HD-SDI Monitoring Output Format” in the
“Setting Up Rooms” chapter of the Kaleido-X User’s Manual, for more information.