2 cpu status led, 3 boot led, 4 power led – Grass Valley KMV-3901 Jul 30 2012 User Manual
Page 11: 5 sdi leds
GUIDE TO INSTALLATION AND OPERATION
KMV-3901/3911 |
7
3.2.2 CPU Status LED
Monitors the status of the CPU operation.
LED
Meaning
Green
OK
Red
CPU kernel error
Blinking Red
Upgrading
3.2.3 Boot LED
Monitors the status of the system firmware.
LED
Meaning
Blinking Green
System OK (“heartbeat” signal)
Steady Red
Beginning of start-up process (normal)
Continuous - error
Steady Green
or OFF
Software not running
3.2.4 Power LED
Monitors the status of the power on board the KMV-3901/3911 card.
LED
Meaning
Green
OK
Red
Error detected
This is a latched error and will remain displayed
until the next reboot, even if the error was a brief
glitch and the supply is OK.
If the LED remains red after a restart, there is or
has been a fault in the power source.
3.2.5 SDI LEDs
This group of eight LEDs monitors the status of the eight inputs to
the KMV-3901/3911 card. The frame door must be open in order for
the LEDs to be visible.
.
LED
Meaning
Green
Input SDI signal detected
Red
Error - no input signal detected
Power LED
Boot LED
CPU Status LED