Epson 1080 - Manual (Page 22)

22
Setting Up the Projector
Turning the Projector On and Off
Turning On the Projector
1. Remove the lens cap.
2. Turn on any connected equipment you plan to use.
3. Turn on the main power switch on the back of the projector.
4. Press the On button on the remote control or the P Power button on the projector.
Note: To prevent children from turning on the projector, you can use the Child Lock. See page 32
for details.
If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 45 for
details.
The projector takes about 30 seconds to warm up and display an image. If you don’t see a
picture, you may need to change the image source as described on page 23.
Power switch
Turn on the projector