Grass Valley K2 ASI Media Client - Manual (Page 50)

50 K2 ASI Media Client User Manual June 10, 2008
Chapter 5 Recording
The Delete at starting mode shows the delete time (only with Dated list and GPI or/
and In Band start trigger). Day of week, hour, minute and second may be selected.
GPI: starting or stopping mode that allows, when GPI mode is activated, to trigger the
beginning and/or the end of the event manually.
Input trigger shall be shown:
• Number: number of the input trigger connector used. Start and stop GPI are totally
independent (i.e. an event can be associated with a number for its start mode and
another one for its stop mode)
• Edge: edge kind (i.e. rising or falling) for a number superior to 5, optional card is
required
In Band: starting or stopping mode that allows, provided the In Band mode is
activated, to trigger the beginning and/or the end of the event through an in-band
signal.
The In Band signal shall be shown:
• Input: choose from the list the number of the input ASI connector that contains the
In Band signal
• Service: choose from the list the service name that contains the In Band signal
• Event ID: an event can be associated with any event (event begins/stops when a
Cue Tone event is received) or with a specific event ID (event begins/stops when
the specific event ID is received). Start and stop In Band are totally independent
(an event can be associated with a specific event ID for his start mode and an other
for his stop mode)
Normal/Inverted: there is a specific Cue Tone to start an event and another to stop it.
If Normal is enabled, the event begins when the specific start Cue Tone is received
and stops when the specific stop Cue Tone is received. If Inverted is enabled, the
event begins with the specific stop Cue Tone and stops with the specific start Cue
Tone.