Grass Valley K2 ASI Media Client - Manual (Page 33)

June 10, 2008 K2 ASI Media Client User Manual 33
Services View
Input Services View
The input Services view provides an immediate "health check" of input services
through the display of overlays. For further details, see the “Symbols & Icons”
section.
Output Services View
The Services view is the same for the Inputs and Outputs panels. Refer to the “Input
Services View” section.
In case of synchronization loss, no data or no signal is detected over the input, and the
Services view is cleared. The cause for this can be:
• No signal: the server does not detect any signal on the input. The wire is
disconnected or signal is no longer present
• No data: the stream only contains empty packets. No more useful data is present
• No synchro: no synchronization byte (0x47) detected at the beginning of each
packet (every 188 or 204 bytes)