Sub command preload-play, Life cycle diagram – Grass Valley K2 Edge Protocol Manual v1.0 User Manual

Page 25

K2 Edge Protocol Manual – document version 1.0 – Page 25

5.9. Sub command preload-play

The

preload-play command combines the individual preload and play commands described

below. Its feedback is almost an exact combination of the feedback produced by these individual

commands.

5.9.1. Life cycle diagram
The diagram below shows the life cycle of the

preload-play command.

The start point can be scheduled with the

stm (start time) field, and if not defined the preload phase

starts ASAP.

The play point can be scheduled with the

stm-play field, and if not defined the playback phase starts as

soon as the preload phase has completed.