Grass Valley K2 Edge Protocol Manual v1.0 - Manual (Page 14)

K2 Edge Protocol Manual – document version 1.0 – Page 14
4.8. Sub command preload-play
Function: preloads a template instance and automatically starts playback, where both the start time of the
preload- and playback phase can be optionally controlled.
field name
field type Value
cmd mandatory nre
subcmd mandatory preload-play
template mandatory Name of the template to be preloaded, as defined in Channel
Composer. For example: 'PlayMovie' (without the quotes).
exid mandatory External ID. Free format. See above.
inst mandatory Unique template instance ID. Numeric. See above.
stm optional Start time for the preload phase of the command in hh:mm:ss:ff
timecode format. When not specified, the command starts as soon
as possible.
stm-play optional Start time for the playback phase of the command in hh:mm:ss:ff
timecode format. Note that stm-play cannot be earlier in time
than ready point of preload phase. When not specified, the
playback phase starts as soon as the preload phase is ready.
spname0
spvalue0
optional Optional scene parameters. See above.
sg-select optional Embedded alternative to separate sg-select sub command,
where the value for this field must be set to what the
rootfolder field expects in the sg-select command.
See section on sub command sg-select below for details.
role optional Role field. See above.
fb-sw optional Feedback switch. Set value to true to request feedback.
fb-lev optional Feedback detail level. Supported values are basic, most and
full. Default is basic.
Example:
{cmd=nre; subcmd=preload-play; template=PlayMovie; inst=0; exid=0;
stm=14:13:00:00; stm-play=14:15:30:00; spname0=clipname;
spvalue0=a0000123.mpg;}
Note that newlines do not exist in K2 Edge API commands and that the example above was wrapped for
layout purposes.