Grass Valley DAP-1781 - Manual (Page 9)

GUIDE TO INSTALLATION AND OPERATION
DAP-1781 | 9
2 Installation
2.1 Unpacking
Make sure you have ordered and received the DAP-1781 and its associated rear panel. If any of the
following items are missing, contact your distributor or Miranda Technologies Inc.
• DAP-1781 8-Channel Digital Audio Processor
• One of the DAP-1781 Rear Panels (see figures on page 6)
• An A-BUS flat cable
2.2 Installation in the Densité frame
The DAP-1781 must be mounted in a DENSITÉ frame. The installation includes both the DAP-1781
module, and the rear panel module. It is not necessary to switch off the frame’s power when installing or
removing the card.
Detailed instructions for installing cards and their associated rear panels in the Densité frame are given in
the Densité Frame manual.
When the DAP-1781 is used in conjunction with a video module such as XVP-1801 and/or another DAP-
1781, the A-BUS flat cable must be installed between the A-BUS connectors on the front card edges.
• Note: for a two card installation, use the two end connectors of the flat cable and leave the
middle one unplugged.
XVP-1801
UAP-XXXX
DAP-1781