Grass Valley DAP-1781 - Manual (Page 25)

GUIDE TO INSTALLATION AND OPERATION
DAP-1781 | 25
Status Icons
At the top, to the left of the Miranda logo, are six status icons that report various aspects of the card’s
operation.
Icon # Indicates appearance interpretation
1 Card control
status Green if the card is controlled remotely (iControl).
Yellow when locally controlled.
2 - 5 AES Inputs status Green if OK,
Red if an AES error is detected (the error can be
Validity, CRCC, Parity, Biphase or No Lock)
Grey if detection is disabled (card used with a
single rear panel for a decoder card)
Note: Each input error can be masked
independently
6 Reference status Green if OK,
Red if an error has been detected or there is no
reference connected. The error message is
Reference Input Mismatch.
Move the cursor over an icon to see its current status in the message area below the icons. If there is an
error status, the message will appear automatically. If there are multiple error messages, the display will
cycle through them.