Grass Valley RCP2050 - Manual (Page 22)

18
CopperHead RCP 2050 Features
Rotary Encoder
Rotary Encoder
The encoder allows bit increment and decrement of the selected value.
The encoder also has a push switch. This is used in some emulations to switch between
functions. Refer to 'Control Features Chart'.
• If either 'RED GAIN' or 'BLUE GAIN' LEDs are active (flashing), pushing the switch will
swap control to the other.
• If either 'RED PED' or 'BLUE PED' LEDs are active (flashing), pushing the switch will swap
control to the other.
7. GAMMA Adjusts the camera gamma characteristic.
8. DETAIL Adjusts the picture edge detail. Some call it 'Contour' or aperture
correction.
9. IRIS Inhibits the joystick IRIS control. Varies the iris as the joystick.
Selecting IRIS AUTO reduces the sensitivity of control, allowing small
variation of the auto setting. This is camera dependant. Some
cameras do not allow any adjustment in IRIS AUTO mode.
Note: Color GAIN and PED Adjustments can be adjusted by pushing
each individual button, or for quicker access, by pushing down on the
ROTERY ENCODER (10) to cycle between RED, BLUE, and GREEN (when
available).
Parameter Description