Grass Valley RCP2050 - Manual (Page 16)

12
Installation and Configuration
Calibrate Camera/Joystick
Calibrate Camera/Joystick
Fig. 2-6: Engineering Menu, Page 4
Page 4 of the Engineering menu allows you to enable or disable control of various camera
functions, as well as to calibrate the joystick for your particular camera:
• Variables: On or Off
• Main Ped: On or Off
• Shutter: On or Off
• Iris: On or Off
• Gain: On or Off
Joystick Tension
Joystick tension may be adjusted to personal preference using the adjuster screw, which is
accessible through a hole in the under side of the unit directly under the centre of the
joystick when centrally positioned.
LED Illumination Test
Note that a camera/camcorder does not need to be connected.
Adjustment Procedure:
1 Switch the OCU to OFF.
2 Press and hold ENGr button, press the ON/OFF button.
The test will start by illuminating tally and then illuminate the buttons in groups and end
with the blue leds. The OCU will then revert to normal operation.
Note that the SHUTTER
▲▼
and GAIN
▲▼
buttons do not illuminate.