Grass Valley RCP2050 - Manual (Page 10)

6
Installation and Configuration
About the Installation
About the Installation
The unit has low power dissipation and does not require any special ventilation
requirements. It may be used free standing or with optional brackets, mounted into a desk
top. All cables leave the OCU from the rear. Because of the unit's low profile height, the rear
connector panel may be tilted downwards to provide easier access as necessary for cabling
when mounted in- desk. To do this loosen the screw either side of the connector panel (in
the slot) and tilt the panel as required, re-tighten the screws.
Device Storage
As with all electronic equipment, both high and low temperature extremes should be
avoided as well as the ingress of moisture and dust. The units are rugged in construction,
but sharp shocks and high levels of vibration must also be avoided. Keep the unit within the
limits defined in the specification.
Connectors
The CHRCP2050A has four connectors:
• Main I/O (DB15)
• Preview Output (BNC)
• Video Input (BNC)
• Video Output (BNC)
Fig. 2-1: Rear Panel Connectors
Video
Output Video
Input Preview
Output Main I/O