Grass Valley ADVC-HDM1 - Manual (Page 15)

– 12 –
When using LTC, input the time code to TC IN and press the [Time Code Input
Switch] on the front panel of the ADVC-HDM1 to turn on the [LTC Enabled LED].
When using VITC, press the [Time Code Input Switch] on the front panel of the
ADVC-HDM1 to turn on the [VITC Enabled LED].
a Press for more than 1 sec.
b Make sure that the light comes on
a Press for more than 1 sec.
b Make sure that the light comes on
ADVC_HDM1_EN.book Page 12 Tuesday, December 19, 2006 9:20 AM