Grass Valley 2041EDA - Manual (Page 14)

14 2041EDA Instruction Manual
Specifications
Specifications
Table 3. 2041EDA Specifications
Parameter Value
Input
Number and type of inputs 1 BNC
Input impedance 75 Ohm
Input signal type Serial digital component conforming to the following formats:
• SMPTE 292M
• SMPTE 259M (143 Mbps, 177 Mbps, 270 Mbps, 360 Mbps)
• EBU 1697
• 4 Mbps to 1.5 Gbps with PN20 pseudonoise sequence, maximum
ratio of 19/1
• SMPTE 310M
• DVB-ASI
Signal level SDI 800 mV p-p ±10% max
Return loss >15 dB 0.004 to 1.5 GHz
Differential mode range <5 V up to 60 Hz
Equalization Auto equalizing:
HD signals up to 90 m of Belden 8281 or 120 m of Belden 1694a
SD signals up to 100 m of Belden 8281 or equivalent
Outputs
Number and type of outputs 8 BNCs
Output impedance 75 Ohm
Signal type Serial digital component conforming to the following formats:
• SMPTE 292M
• SMPTE 259M (143 Mbps, 177 Mbps, 270 Mbps, 360 Mbps)
• EBU 1697
• 4 Mbps to 1.5 Gbps with PN20 pseudonoise sequence, maximum
ratio of 19/1
• SMPTE 310M
• DVB-ASI
Signal level SDI 800 mV p-p ±10%
Return loss >15 dB 0.004 to 1.5 GHz
Error Checking Transparent to embedded EDH
Electrical length 10 ns
Signal polarity Non-inverted
Mute Between 200-300 m of Belden 8281
Rise and fall time 160-270 ps between 20-80%
Power
Input power maximum < 7W
Environmental
Frame temperature range 0 to 45 ° C
Operating humidity range 0 to 90% non condensing
Non-operating temperature -10 to 70 ° C