Grass Valley 2041EDA - Manual (Page 12)

12 2041EDA Instruction Manual
Configuration and Monitoring
Configuration and Monitoring
The 2041EDA has no configuration requirements. There are no local
jumpers or controls on the 2041EDA module.
Remote Monitoring
2041EDA monitoring can be performed remotely using the 2000NET inter-
face (see
Figure 4 ). This section describes the GUI access to the module con-
figuration and monitoring functions. Refer to the 2000NET Network
Interface Module Instruction Manual for information on setting up and
operating the 2000 frame network.
Note The physical appearance of the menu displays shown in this manual repre-
sent the use of a particular platform, browser and version of 2000NET
module software. They are provided for reference only. Displays will differ
depending on the type of platform and browser you are using and the version
of the 2000NET software installed in your system.
The 2000 modules can be addressed by clicking on a specific module icon
in the frame status display or on a module name or slot number in the link
list on the left.
Figure 4. 2000NET GUI
8046-13 r1
The Links section lists the frame and its current modules. The selected link's Status
page is first displayed and the sub-list of links for the selection is opened. The sub-list
allows you to select a particular information page for the selected device.
Content display section displays the information page
for the selected frame or module (frame slot icons are also
active links).
Online Manual Link
Refresh button for manual
refresh of page