H3C Technologies H3C Intelligent Management Center - Manual (Page 55)

6-11
virtual device as an example to describe how to configure the device
panel for a high-end device by using the H3C VPD.
1) The H3C S12500 series high-end devices support entityMIB and
ifTable, making it possible for you to precisely manage the
module, power supply, fan, and port entities. First, draw a picture
for the entities to be managed, such as the device chassis and
modules.
2) Create an H3C project. See the operation in section Creating a
Project for reference. Change the enterprise ID to 25506.
3) Right-click Chassis from the device panel tree and click Add to
add a device.
4) Edit the value of each property, as shown in Figure 6-16 . You
need to draw or photo the entity image beforehand.
Figure 6-16 Edit device properties
5) Select device S12518 from the device panel tree. The device
image appears at the preview area. Drag the image to the work
area. There are slots 0 to 29 on the device. Because the device
supports entPhysicalTable, there must be information about
power supplies and fans.
6) Use a MIB browsing tool to view the entPhysicalTable
implementation on the device. You are recommended to use the