H3C Technologies H3C Intelligent Management Center - Manual (Page 34)

27
Figure 17 Configure Web Service Port
8. The default port for HTTP access is 8080 and that for HTTPS access is 8443. You can change these
port numbers as needed. Make sure the specified ports are open in the firewall settings and are not
being used by another services. If UAM is to be installed for the IMC system, set HTTP Port to 80.
You cannot change the HTTP port number after IMC installation is complete. To change the HTTP
port number, you must reinstall IMC.
9. Click Deploy.
The Deploying window appears, as shown in
Figure 18 .