H3C Technologies H3C Intelligent Management Center User Manual
Page 33
26
In this example, select all the components.
4.
Click OK.
The Database Configuration window appears, as shown in
Figure 16 Database Configuration
5.
Enter the password for the superuser, which you used for installing the IMC database.
6.
Select the location for saving data files.
By default, data files are stored in the \Program Files\imcdata directory of the disk with the
maximum free space on Windows or /opt/imcdata on Linux. In this example, data files are stored
in E:\Program Files\imcdata. You can also click Browse to customize the data file location. Make
sure the location for saving data files does not include any files. Otherwise, IMC Platform
deployment fails.
NOTE:
You must select a writable, uncompressed local disk drive. When you do not, an error can occur during
IMC deployment. To change the compression setting of a disk drive:
•
Right-click the disk name and select Properties from the shortcut menu.
•
On the General tab of the disk properties window that appears, clear the selection of Compress drive
to save disk space.
•
Click OK.
7.
Click Next.
The Configure Web Service Port window appears, as shown in