beautypg.com

Connecting an ac power cable, Figure 10, For horizontal slot installation, see – H3C Technologies H3C SecPath M9000 Series User Manual

Page 12: Figure 11

background image

9

Figure 10 Installing a power module in a vertical slot (on an M9010)

Figure 11 Installing a power module in a horizontal slot

Connecting an AC power cable

WARNING!

Before you connect the power cable, make sure the circuit breaker on the power cable is switched off.

To connect the power cable:

1.

Plug the power cable into the power receptacle of the power module.

2.

Use a cable tie to secure the power cable to the cable management bracket.

3.

Plug the other end of the power cable to the AC power receptacle of the power source.

See also other documents in the category H3C Technologies Safety: