H3C Technologies H3C SecBlade FW Cards - Manual (Page 15)

4
inline-interfaces
Syntax
inline-interfaces id [ blackhole | reflect ]
undo inline-interfaces id
View
System view
Default Level
2: System level
Parameters
id: ID for an inline forwarding entry, in the range of 1 to 100.
blackhole: Configures a blackhole-type inline forwarding entry.
reflect: Configures a reflect-type inline forwarding entry.
Description
Use the inline-interfaces command to create an inline forwarding entry.
Use the undo inline-interfaces command to remove an inline forwarding entry.
Note that if neither of the blackhole and reflect keywords is provided, the command creates a
forward-type inline forwarding entry.
Examples
# Create forward-type inline forwarding entry 2.
system-view
[Sysname] inline-interfaces 2
# Create blackhole-type inline forwarding entry 1.
system-view
[Sysname] inline-interfaces 1 blackhole
port inline-interfaces
Syntax
port inline-interfaces id
undo port inline-interfaces
View
Layer 2 Ethernet port view
Default Level
2: System level
Parameters
id: ID of an existing inline forwarding entry.
Description
Use the port inline-interfaces command to assign the interface to the specified inline forwarding entry.