H3C Technologies H3C SecBlade FW Cards - Manual (Page 14)

3
Description
Use the reset bridge forwarding statistics command to clear all Layer 2 forwarding statistics.
NOTE:
This command is available only on the SECBLADEII-CMW520-R3166 version.
Examples
# Clear all Layer 2 forwarding statistics.
reset bridge forwarding statistics
Inline Layer 2 forwarding configuration commands
display inline-interfaces
Syntax
display inline-interfaces
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display inline-interfaces command to display inline Layer 2 forwarding information.
Examples
# Display inline Layer 2 forwarding information.
display inline-interfaces
Total inline-interfaces : 3
Inline-interfaces ID Type Interface
1 Forward Ten-GigabitEthernet0/0.1 Ten-GigabitEthernet0/0.2
2 Blackhole Ten-GigabitEthernet0/0.3
3 Reflect Ten-GigabitEthernet0/0.4
Table 2 Output description
Field Description
Total inline-interfaces Total number of inline Layer 2 forwarding entries
Inline-interfaces ID Inline Layer 2 forwarding entry ID
Type Inline forwarding type
Interface An Interface pair or an interface in an inline forwarding entry